The extra-large XL lens case is designed for larger contact lenses, such as scleral lenses and mini-scleral lenses. The more spacious cups offer more room than a standard lens case and are better suited to lenses with a larger diameter. The case has two separate compartments, ensuring that the left and right lenses remain separate. Thanks to its compact design, the accessory remains practical to use. A suitable choice for contact lens wearers with larger lens sizes. Read more
SMEYEL extra-large (XL) lens case is designed for storing and disinfecting extra-large (mini) scleral lenses with a diameter of up to approximately 24 mm. Whereas a standard lens case flattens or damages the edges of the lenses, this spacious case offers sufficient room and depth to accommodate the larger diameter and curvature of scleral lenses. The case is made from smooth, hypoallergenic medical-grade plastic and features clear L/R markings to prevent mix-ups. The leak-proof caps (click or screw) keep the solution inside. A clean case, replaced in good time, is an essential part of a hygienic lens care routine.
You use the XL lens case to store and disinfect larger contact lenses, such as larger scleral lenses or mini-scleral lenses, in suitable solution. The case has an extra-large and deep design, ensuring the lens remains fully submerged and the lens edges are not flattened. Fill the case with fresh solution before each use and do not top up with old solution. Use the solution recommended for the lenses and follow the care system specified for the scleral lenses. The L/R marking helps to ensure that the left and right lenses are not mixed up. This keeps the lenses organised and properly disinfected. If you have any questions about the correct solution, your contact lens specialist will be able to advise you.
The XL lens case is designed for lenses with a diameter of up to approximately 24 mm. Due to their size and curvature, larger scleral lenses require more space and depth than a standard case can provide. The extra-spacious design ensures that the lens remains fully submerged during storage and disinfection, and prevents the lens edges from being flattened or damaged when the cap is closed. Always check that the case is suitable for the specific lens and the recommended care system. Not all scleral lenses have the same diameter, so suitability depends on the lens. The contact lens specialist can advise whether the XL case is suitable for the wearer’s scleral lens, or whether a different case would be more appropriate.
Larger scleral lenses do not always fit properly in a standard lens case. A more spacious case makes inserting, storing and removing the lenses much easier.
This depends on the lens’s diameter, shape and care system. The case is designed for larger (mini) scleral lenses up to approximately 24 mm, but not every scleral lens is the same size. You should therefore always check that the case fits the specific lens and follow the advice of your contact lens specialist. For some scleral lenses, the scleral lens case with a vertical design may be more suitable, depending on the shape and sagitta of the lens. The choice of case forms part of the broader advice on scleral lens care. The contact lens specialist determines which case is suitable for the diameter and shape of the wearer’s lens, ensuring the lens can be stored properly and hygienically.
Do not simply use this case as a substitute for the special case supplied with a hydrogen peroxide system. Hydrogen peroxide must be neutralised in accordance with the product instructions, and this neutralisation only works properly with the corresponding case. You should therefore always use peroxide solution with the case supplied with that system. For scleral lenses, there is a peroxide system that comes with its own spacious scleral lens case. The XL lens case is intended for use with a cleaning, disinfecting or storage solution that does not require neutralisation. If you wish to use a scleral lens with a peroxide system, use the corresponding case and follow the neutralisation time. Your contact lens specialist will advise you on which system and which case are suitable for your lenses.
Discard any used solution after inserting your lenses and clean the case according to the instructions for the solution you’re using. Then leave the case to dry clean and open. Do not use tap water for the lens case or the lenses, as tap water is not suitable for contact lenses. Next time, fill the case with fresh solution. The smooth, hypoallergenic material makes the case easy to keep clean. Touch the inside as little as possible and store the case away from make-up, bathroom products and other liquids. A clean, dry case contributes to a hygienic lens care routine. If you are unsure about the cleaning method to use with a particular solution, follow the instructions on the packaging and the advice of your contact lens specialist.
A practical guideline is to replace the case every three months, or sooner if it is damaged, visibly soiled, discoloured or worn. A worn or dirty case can promote bacterial growth, which undermines the hygiene of your lens care routine. Check the case regularly for cracks, build-up or a lid that no longer closes properly, and replace the case if any of these issues arise. Replacing the case in good time ensures that the storage and disinfection of scleral lenses remain hygienic. The case is sold individually, so you can easily replace it. If you have any questions about how often to replace it in a specific situation, your contact lens specialist will provide advice tailored to you and your scleral lenses.
The XL lens case and the scleral lens case are both designed for larger scleral lenses, but differ in shape. The XL lens case has an extra-spacious, deep cup suitable for diameters of up to approximately 24 mm. The scleral lens holder has a taller, vertical cylindrical design with extra-wide and deep lens compartments. Which holder is most suitable depends on the diameter, shape and sagitta of the lens, as well as the care system. For some lenses, the spacious cup is more suitable, whilst for others, the tall, vertical design is preferable. The contact lens specialist determines which case is suitable for the wearer’s scleral lens. In practice, you can offer both options, so that you can choose the case that suits the lens you are fitting.
The XL lens case is designed for a single pair of scleral lenses, with an L/R marking to prevent the left and right lenses from being mixed up. This is important because scleral lenses often differ in power and fit between the left and right eyes. Always store the correct lens on the corresponding side and follow the markings. It is recommended that each wearer has their own case; do not share a case with others. The case is sold individually, so you can keep enough on hand for each wearer and for replacements. Fill both sides with fresh solution before each use and use the solution recommended for the scleral lenses. This ensures the lenses are stored neatly and hygienically.
The XL lens case is designed for larger (mini) scleral lenses. For soft lenses, a standard, flat lens case is usually sufficient, whilst for standard rigid gas-permeable (RGP) lenses, an RGP lens case with lens baskets is more suitable. For each lens type, use the case that matches the lens size and the solution used. A case that is too large for a small lens is less practical and unnecessary. The choice of case forms part of the advice on lens care. If you are unsure which case is suitable, ask your contact lens specialist for advice; they can advise you on the type of case that is suitable for the lens and the wearer’s wearing habits. This ensures that lens care is tailored to the type of lens.
