<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-KXVNDH86" height="0" width="0" style="display:none;visibility:hidden">

Workplace eye wash (Health and Safety)

workplace eye wash, workplace eye wash unit, health and safety eye wash, industrial eye wash, workplace eye wash bottle, health and safety eye wash bottle, workplace eye wash, emergency eye wash, emergency eye rinse, company eye wash bottle, industrial eye wash, eye wash safety, eye wash bottle safety, health and safety eye wash, health and safety eye wash system, workplace eye wash, company eye wash, industrial eye wash, emergency eye wash bottle
A workplace eye wash (ARBO) is a rinsing facility on the work floor, designed to enable both eyes to be rinsed simultaneously with water or saline solution in the event of an eye accident. According to health and safety guidelines, such a facility is mandatory in areas where employees are at risk of splashes from chemicals, dust or other irritants.

What is a workplace first-aid eye wash?

A workplace eye wash (ARBO) is a fixed or portable rinsing system available on the work floor to enable both eyes to be rinsed immediately and thoroughly in the event of an accident. The term ‘ARBO’ refers to the Working Conditions Act, under which employers are obliged to install a suitable eyewash facility in areas with an increased risk of eye injury.

Such an eye wash usually consists of two soft spray nozzles or caps that deliver a constant stream of lukewarm water, so that both eyes can be rinsed at the same time without having to hold them open with your hands. The aim is to flush harmful substances such as chemicals, dust, metal particles or other irritants out of the eye as quickly as possible, before they can cause damage to the cornea or other eye structures.

Health and Safety guidelines stipulate that the eye wash must be accessible within ten seconds from the workplace, that the water flow must be able to continue for at least fifteen minutes, and that the water temperature must be between fifteen and thirty-five degrees Celsius. The facility must be clearly marked and tested regularly to ensure it is always ready for use.

In addition to fixed eye-wash stations, there are also portable eye-wash units and eye-wash bottles for smaller workplaces or mobile situations. These usually contain a sterile saline solution and are intended for first aid until further medical care is available.

Good to know

When is a workplace eye wash mandatory?

An eye wash is mandatory in workplaces where employees may come into regular or occasional contact with hazardous substances that could cause eye injury. Examples include laboratories, production areas handling chemicals, construction sites, metalworking workshops, and places where caustic, corrosive or irritant substances are used. The employer must assess whether an eye wash is required as part of the risk inventory and evaluation (RI&E).

How do you use an eye wash in the event of an accident?

If you come into contact with a hazardous substance, immediately turn on the eye wash and hold both eyes under the stream of water. Do not squeeze your eyes shut; instead, try to keep them open or gently pull them open with your fingers so that the water can rinse the entire surface of the eye thoroughly. Continue rinsing for at least fifteen minutes, even if the pain or irritation has already subsided, and slowly turn your head from side to side to reach all parts of the eye. Always seek medical assistance afterwards, even if the symptoms appear to be improving.

Maintenance and checks

An eye wash at the workplace must be tested and maintained regularly. The water pipes may contain stagnant water in which bacteria can grow, so most companies briefly flush the system once a week. Also check that the nozzles are clean, that the water pressure is adequate and that the temperature is within the correct range. Portable eye wash units and rinse bottles have an expiry date; replace them in good time.

Difference from personal eye wash

A workplace health and safety eye wash is intended for emergency first aid in the event of exposure to hazardous substances. For everyday comfort – for example, if you have dry or irritated eyes due to working at a computer screen or air conditioning – there are personal eye-rinsing products and moisturising eye drops that you can use at home or in the office. These are not intended as a substitute for an emergency eye wash, but can help to keep your eyes comfortable in everyday situations.

Frequently asked questions

According to health and safety guidelines, an eye wash must be accessible within ten seconds from the area where you are working with hazardous substances. This timeframe is crucial, as every second counts when it comes to minimising damage to the eye. The route to the eye wash must be clear and clearly marked, with no obstacles or doors that need to be opened first.

A portable eye wash bottle or eye wash unit can be a useful addition to first aid kits, but it does not usually replace a fixed health and safety eye wash unit, as required by the risk assessment. Portable bottles often contain a limited amount of liquid, whereas in the event of a chemical accident, you must continue rinsing for at least fifteen minutes. They are, however, useful for mobile workplaces or as an additional facility in places where a fixed installation is not feasible.

A combination shower combines an eye wash with a body shower or full-body emergency shower. This is mandatory in areas where not only the eyes, but also the skin or clothing may come into contact with hazardous substances. The eye wash is often fitted to the same unit, at eye level, so that you can use both at the same time or just the eye wash if necessary.

Most companies test the eye wash weekly by running water through it briefly, to prevent stagnant water and bacterial growth and to check that the system is working properly. In addition, a thorough inspection and maintenance at least once a year is advisable, or more frequently if recommended by the manufacturer or the health and safety service. Make a note of the test dates so that you can demonstrate that the facility is always ready for use.

Author & updates

Author:
Publication date: 13 July 2026
Last updated: 13 July 2026