<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-KXVNDH86" height="0" width="0" style="display:none;visibility:hidden">

Contact lens solution for scleral lenses

scleral lens solution, scleral lens maintenance, scleral lens care, scleral lens cleaning solution, scleral lens cleaner, scleral lens storage solution, solution for scleral lenses, scleral lens solution, scleral lens care product, scleral lens cleaning solution
Scleral lens solution is a specially formulated solution used to clean, disinfect and store rigid scleral lenses. Scleral lenses are large, gas-permeable lenses that rest on the white of the eye and form a fluid reservoir between the lens and the cornea.

What is lens solution for scleral lenses?

Scleral lens solution is a care product specially developed for cleaning, disinfecting and storing scleral lenses. Scleral lenses are large, dimensionally stable (gas-permeable) contact lenses with a diameter of approximately 14 to 24 millimetres. They rest on the white of the eye and span the cornea, creating a reservoir of fluid between the lens and the surface of the eye.

As scleral lenses are larger than standard rigid gas-permeable lenses and remain on the eye for longer, it is important that the solution is suitable for this type of lens. The solution must be able to remove proteins, fats and other deposits without damaging the lens material. It must also be able to remove or inactivate micro-organisms, in accordance with the instructions for use.

Many lens solutions for scleral lenses are peroxide systems or all-in-one solutions formulated for rigid gas-permeable lenses. Peroxide solutions contain hydrogen peroxide and require a neutralisation step, whilst all-in-one solutions combine cleaning, disinfecting and storage in a single step. Which type you use depends on the advice of your contact lens specialist and the lens manufacturer’s instructions.

Good to know

Use and care

Scleral lenses should be cleaned and disinfected daily, even if you have only worn them for a few hours. After removing them, gently rub the lens clean with the solution, rinse it and place it in a clean lens case filled with fresh solution. The solution must be left to work for at least the recommended time – often several hours or overnight – in order to be effective.

Never use tap water, saliva or any solution not intended for your type of lens. Replace the solution in the lens case every time and rinse the case itself regularly with fresh solution; allow it to air-dry and replace it in accordance with the instructions for use.

Refrigerated solution for scleral lenses

As well as the care solution, you will often need a sterile saline solution or filling solution for scleral lenses. You fill the lens with this before inserting it, so that the space between the lens and the cornea is filled with a clean, isotonic solution. This filling solution is slightly different from the solution used to clean and store the lens; do not use them interchangeably.

At SMEYEL , you’ll find sterile saline solutions suitable as filling solution for scleral lenses, alongside care solutions for cleaning and disinfection.

Personalised advice

Scleral lenses are often made to measure and prescribed by a specialist optician, optometrist or ophthalmologist. They will also advise you on the correct care products and the best way to look after your lenses. Follow their advice and the instructions for use of the solution carefully to ensure your lenses continue to work properly and remain comfortable to wear.

Frequently asked questions

Many solutions for rigid gas-permeable lenses are also suitable for scleral lenses, but not all of them. Scleral lenses are larger and sometimes have a different coating or treatment. Ask your lens specialist or optician which solution is best suited to your lenses and follow the lens manufacturer’s recommendations.

You use care solution to clean, disinfect and store the lens after wearing it. Filling solution is a sterile saline solution used to fill the lens before inserting it, so that the space between the lens and the cornea is filled with clean fluid. Do not use them interchangeably; each product has its own specific function.

Replace the solution in your lens case every time you place the lenses in it. Never use old or reused solution, as it loses its effectiveness and may contain microorganisms. You should also rinse the lens case regularly with fresh solution, leave it to air-dry and replace it in accordance with the instructions for use, usually every three months.

Yes, peroxide systems are often suitable for scleral lenses and are widely used because they clean and disinfect thoroughly. Do ensure that you complete the neutralisation process in full before inserting the lens, otherwise the peroxide may irritate the eye. Follow the instructions for use carefully and ask your lens specialist for advice if you are in any doubt.

Author & updates

Author:
Publication date: 13 July 2026
Last updated: 13 July 2026