<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-KXVNDH86" height="0" width="0" style="display:none;visibility:hidden">

Chlorine dioxide

chlorine dioxide, ClO₂, chlorine dioxide, chlordioxide
Chlorine dioxide is a disinfectant that is sometimes used in certain contact lens solutions to remove microorganisms from lenses. It works differently from hydrogen peroxide and requires specific usage instructions as set out in the package leaflet.

What is chlorine dioxide?

Chlorine dioxide is a chemical compound used as a disinfectant in some contact lens care systems. It is a yellow-green gas that dissolves in water, where it has a disinfecting effect. In contact lens solutions, chlorine dioxide is present in a controlled, safe concentration designed to remove micro-organisms such as bacteria and fungi from your lenses.

Chlorine dioxide works differently from hydrogen peroxide or preservatives found in all-in-one solutions. It oxidises proteins and other organic substances on the lens surface, thereby tackling dirt and micro-organisms. After the disinfection process, the chlorine dioxide must be neutralised or rinsed out, depending on the system, before you can put the lenses back in your eyes.

Chlorine dioxide systems are less common than hydrogen peroxide or all-in-one solutions, but are sometimes chosen by people who are sensitive to preservatives or who are looking for a thorough clean. The instructions for use vary by brand and system, so it is important to follow the steps exactly.

Good to know

Use and application

Chlorine dioxide is used in specific contact lens care systems designed for soft contact lenses. The disinfection process usually takes several hours and requires a special lens case or a neutralisation step. Always read the instructions for the system you are using, as the steps and times may vary by brand.

As chlorine dioxide is an active ingredient, you must not apply the solution directly to your eye. After disinfection, the lens must be rinsed with a saline solution or neutralised in accordance with the system’s instructions. Failure to do so may result in the remaining chlorine dioxide causing irritation.

Differences from other systems

Compared with hydrogen peroxide systems, chlorine dioxide is less well known, but the principle is similar: both are preservative-free and require a neutralisation or rinsing step. All-in-one solutions, on the other hand, do contain preservatives and are ready for immediate use, without any extra steps.

Chlorine dioxide may be an option if you are sensitive to certain preservatives or if your optician or optometrist recommends a preservative-free system. If you have any questions about which care system is best suited to your lenses and eyes, please discuss this with your optician or optometrist.

Safety and storage

Store chlorine dioxide solutions at room temperature, away from direct sunlight and out of the reach of children. Do not use the solution after the expiry date and never reuse old solution from the lens case. Follow the instructions for replacing the lens case or neutralising tablet, if these are included with the system.

At SMEYEL , you’ll find a wide range of contact lens solutions and care systems, including peroxide systems and all-in-one solutions. If you’re unsure which system is right for you, please contact your optician or optometrist for personalised advice.

Frequently asked questions

No, chlorine dioxide is an active disinfectant that must not come into direct contact with your eye. After the disinfection process, you must rinse the lens with a saline solution or neutralise it in accordance with the system’s instructions for use. If you do not do this, the solution may cause irritation.

Both are preservative-free disinfectants that tackle microorganisms on lenses, but they work differently chemically. Hydrogen peroxide systems are much more common and often use a neutralising disc or tablet. Chlorine dioxide systems are less common and require a specific protocol. Both require a neutralisation or rinsing step before you can put the lenses back in.

Chlorine dioxide systems may be suitable for people who are sensitive to preservatives in all-in-one solutions or who want a more thorough clean. It is important, however, that you follow the instructions for use carefully. Discuss with your optician or optometrist which care system is best suited to your lenses and eyes.

Do not mix different types of lens solutions unless the instructions for use explicitly permit this. Chlorine dioxide systems often have their own specific protocol, involving a dedicated rinse solution or neutralisation step. Always use the products designed for that system and follow the manufacturer’s instructions. If you have any questions, please contact your optician or optometrist.

Author & updates

Author:
Publication date: 13 July 2026
Last updated: 13 July 2026